dmesg - AMD A10-6800K
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.10.0-3-generic (buildd@roseapple) (gcc version 4.8.1 (Ubuntu/Linaro 4.8.1-6ubuntu1) ) #12-Ubuntu SMP Mon Jul 15 16:47:40 UTC 2013 (Ubuntu 3.10.0-3.12-generic 3.10.1)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bd857fff] usable
BIOS-e820: [mem 0x00000000bd858000-0x00000000bd887fff] reserved
BIOS-e820: [mem 0x00000000bd888000-0x00000000bdb47fff] usable
BIOS-e820: [mem 0x00000000bdb48000-0x00000000bdbe6fff] ACPI NVS
BIOS-e820: [mem 0x00000000bdbe7000-0x00000000bea25fff] reserved
BIOS-e820: [mem 0x00000000bea26000-0x00000000bea26fff] usable
BIOS-e820: [mem 0x00000000bea27000-0x00000000bec2cfff] ACPI NVS
BIOS-e820: [mem 0x00000000bec2d000-0x00000000bf071fff] usable
BIOS-e820: [mem 0x00000000bf072000-0x00000000bf7f2fff] reserved
BIOS-e820: [mem 0x00000000bf7f3000-0x00000000bf7fffff] usable
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100001000-0x000000020effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: MSI MS-7793/FM2-A85XA-G65 (MS-7793), BIOS V2.3 06/13/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x20f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000BF800000 mask FFFFFF800000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 000000023f000000 aka 9200M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3064MB, range: 8MB, type UC
total RAM covered: 3064M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 16M num_reg: 3 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3064MB, range: 8MB, type UC
e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd8a0-0x000fd8af] mapped at [ffff8800000fd8a0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fc8000, 0x01fc8fff] PGTABLE
BRK [0x01fc9000, 0x01fc9fff] PGTABLE
BRK [0x01fca000, 0x01fcafff] PGTABLE
init_memory_mapping: [mem 0x20ee00000-0x20effffff]
[mem 0x20ee00000-0x20effffff] page 2M
BRK [0x01fcb000, 0x01fcbfff] PGTABLE
init_memory_mapping: [mem 0x20c000000-0x20edfffff]
[mem 0x20c000000-0x20edfffff] page 2M
init_memory_mapping: [mem 0x200000000-0x20bffffff]
[mem 0x200000000-0x20bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xbd857fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0x7fffffff] page 1G
[mem 0x80000000-0xbd7fffff] page 2M
[mem 0xbd800000-0xbd857fff] page 4k
init_memory_mapping: [mem 0xbd888000-0xbdb47fff]
[mem 0xbd888000-0xbdb47fff] page 4k
BRK [0x01fcc000, 0x01fccfff] PGTABLE
init_memory_mapping: [mem 0xbea26000-0xbea26fff]
[mem 0xbea26000-0xbea26fff] page 4k
init_memory_mapping: [mem 0xbec2d000-0xbf071fff]
[mem 0xbec2d000-0xbedfffff] page 4k
[mem 0xbee00000-0xbeffffff] page 2M
[mem 0xbf000000-0xbf071fff] page 4k
init_memory_mapping: [mem 0xbf7f3000-0xbf7fffff]
[mem 0xbf7f3000-0xbf7fffff] page 4k
init_memory_mapping: [mem 0x100001000-0x1ffffffff]
[mem 0x100001000-0x1001fffff] page 4k
[mem 0x100200000-0x13fffffff] page 2M
[mem 0x140000000-0x1ffffffff] page 1G
RAMDISK: [mem 0x35fda000-0x36fe4fff]
ACPI: RSDP 00000000000f04a0 00024 (v02 ALASKA)
ACPI: XSDT 00000000bdbd5070 00064 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000bdbdb0b8 0010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI BIOS Bug: Warning: Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20130328/tbfadt-603)
ACPI: DSDT 00000000bdbd5170 05F41 (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 00000000bdbdc080 00040
ACPI: APIC 00000000bdbdb1c8 00072 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 00000000bdbdb240 00044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 00000000bdbdb288 0003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: HPET 00000000bdbdb2c8 00038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: IVRS 00000000bdbdb300 00070 (v02 AMD ANNAPURN 00000001 AMD 00000000)
ACPI: SSDT 00000000bdbdb370 004B7 (v02 AMD ANNAPURN 00000001 MSFT 04000000)
ACPI: CRAT 00000000bdbdb828 002F8 (v01 AMD ANNAPURN 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000020effffff]
Initmem setup node 0 [mem 0x00000000-0x20effffff]
NODE_DATA [mem 0x20eff3000-0x20eff7fff]
[ffffea0000000000-ffffea00083fffff] PMD -> [ffff880207200000-ffff88020e5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x20effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009dfff]
node 0: [mem 0x00100000-0xbd857fff]
node 0: [mem 0xbd888000-0xbdb47fff]
node 0: [mem 0xbea26000-0xbea26fff]
node 0: [mem 0xbec2d000-0xbf071fff]
node 0: [mem 0xbf7f3000-0xbf7fffff]
node 0: [mem 0x100001000-0x20effffff]
On node 0 totalpages: 1888007
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 12094 pages used for memmap
DMA32 zone: 773995 pages, LIFO batch:31
Normal zone: 17344 pages used for memmap
Normal zone: 1110015 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x05] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228210 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000bd858000 - 00000000bd888000
PM: Registered nosave memory: 00000000bdb48000 - 00000000bdbe7000
PM: Registered nosave memory: 00000000bdbe7000 - 00000000bea26000
PM: Registered nosave memory: 00000000bea27000 - 00000000bec2d000
PM: Registered nosave memory: 00000000bf072000 - 00000000bf7f3000
PM: Registered nosave memory: 00000000bf800000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000
PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000
PM: Registered nosave memory: 00000000fec11000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fed01000
PM: Registered nosave memory: 00000000fed01000 - 00000000fed40000
PM: Registered nosave memory: 00000000fed40000 - 00000000fed45000
PM: Registered nosave memory: 00000000fed45000 - 00000000fed80000
PM: Registered nosave memory: 00000000fed80000 - 00000000fed90000
PM: Registered nosave memory: 00000000fed90000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
PM: Registered nosave memory: 0000000100000000 - 0000000100001000
e820: [mem 0xbf800000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88020ec00000 s86400 r8192 d24192 u524288
pcpu-alloc: s86400 r8192 d24192 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1858484
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Node 0: aperture @ 0 size 32 MB
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ b4000000
PM: Registered nosave memory: 00000000b4000000 - 00000000b8000000
Memory: 7268196k/8634368k available (7044k kernel code, 1082340k absent, 283832k reserved, 6253k data, 1340k init)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
Experimental no-CBs for all CPUs
Experimental no-CBs CPUs: 0-255.
NR_IRQS:16640 nr_irqs:712 16
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
allocated 30408704 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 4700.354 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 9400.70 BogoMIPS (lpj=18801416)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
tseg: 00bf800000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512
tlb_flushall_shift: 5
Freeing SMP alternatives: 28k freed
ACPI: Core revision 20130328
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 27433 entries in 108 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD A10-6800K APU with Radeon(tm) HD Graphics (fam: 15, model: 13, stepping: 01)
Performance Events:
perf: AMD core performance counters detected
AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 0, Processors #1 #2 #3 OK
Brought up 4 CPUs
smpboot: Total of 4 processors activated (37602.83 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xbdb48000-0xbdbe6fff] (651264 bytes)
PM: Registering ACPI NVS region [mem 0xbea27000-0xbec2cfff] (2121728 bytes)
regulator-dummy: no parameters
NET: Registered protocol family 16
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130328/hwxface-568)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
pci 0000:00:00.0: [1022:1410] type 00 class 0x060000
pci 0000:00:00.2: [1022:1419] type 00 class 0x080600
pci 0000:00:01.0: [1002:990c] type 00 class 0x030000
pci 0000:00:01.0: reg 10: [mem 0xc0000000-0xcfffffff pref]
pci 0000:00:01.0: reg 14: [io 0xf000-0xf0ff]
pci 0000:00:01.0: reg 18: [mem 0xfef00000-0xfef3ffff]
pci 0000:00:01.0: supports D1 D2
pci 0000:00:01.1: [1002:9902] type 00 class 0x040300
pci 0000:00:01.1: reg 10: [mem 0xfef44000-0xfef47fff]
pci 0000:00:01.1: supports D1 D2
pci 0000:00:04.0: [1022:1414] type 01 class 0x060400
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: System wakeup disabled by ACPI
pci 0000:00:10.0: [1022:7812] type 00 class 0x0c0330
pci 0000:00:10.0: reg 10: [mem 0xfef4a000-0xfef4bfff 64bit]
pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
pci 0000:00:10.0: System wakeup disabled by ACPI
pci 0000:00:10.1: [1022:7812] type 00 class 0x0c0330
pci 0000:00:10.1: reg 10: [mem 0xfef48000-0xfef49fff 64bit]
pci 0000:00:10.1: PME# supported from D0 D3hot D3cold
pci 0000:00:10.1: System wakeup disabled by ACPI
pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
pci 0000:00:11.0: reg 10: [io 0xf140-0xf147]
pci 0000:00:11.0: reg 14: [io 0xf130-0xf133]
pci 0000:00:11.0: reg 18: [io 0xf120-0xf127]
pci 0000:00:11.0: reg 1c: [io 0xf110-0xf113]
pci 0000:00:11.0: reg 20: [io 0xf100-0xf10f]
pci 0000:00:11.0: reg 24: [mem 0xfef51000-0xfef517ff]
pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:12.0: reg 10: [mem 0xfef50000-0xfef50fff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:12.2: reg 10: [mem 0xfef4f000-0xfef4f0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:13.0: reg 10: [mem 0xfef4e000-0xfef4efff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:13.2: reg 10: [mem 0xfef4d000-0xfef4d0ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
pci 0000:00:14.2: reg 10: [mem 0xfef40000-0xfef43fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:14.5: [1022:7809] type 00 class 0x0c0310
pci 0000:00:14.5: reg 10: [mem 0xfef4c000-0xfef4cfff]
pci 0000:00:14.5: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1400] type 00 class 0x060000
pci 0000:00:18.1: [1022:1401] type 00 class 0x060000
pci 0000:00:18.2: [1022:1402] type 00 class 0x060000
pci 0000:00:18.3: [1022:1403] type 00 class 0x060000
pci 0000:00:18.4: [1022:1404] type 00 class 0x060000
pci 0000:00:18.5: [1022:1405] type 00 class 0x060000
pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:01:00.0: reg 10: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref]
pci 0000:01:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: PCI bridge to [bus 01]
pci 0000:00:04.0: bridge window [io 0xe000-0xefff]
pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
acpi PNP0A03:00: Requesting ACPI _OSC control (0x1d)
acpi PNP0A03:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 *5 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
acpi root: \_SB_.PCI0 notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:01.0
SCSI subsystem initialized
ACPI: bus type ATA registered
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0xbd858000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbdb48000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbea27000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf072000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
e820: reserve RAM buffer [mem 0x20f000000-0x20fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [mem 0x90000000-0xbfffffff] could not be reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [mem 0xfeb80000-0xfebfffff] could not be reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [io 0x0605-0x0606] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: [dma 4]
pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
system 00:08: [io 0x04d0-0x04d1] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:0a: [io 0x04d0-0x04d1] has been reserved
system 00:0a: [io 0x040b] has been reserved
system 00:0a: [io 0x04d6] has been reserved
system 00:0a: [io 0x0c00-0x0c01] has been reserved
system 00:0a: [io 0x0c14] has been reserved
system 00:0a: [io 0x0c50-0x0c51] has been reserved
system 00:0a: [io 0x0c52] has been reserved
system 00:0a: [io 0x0c6c] has been reserved
system 00:0a: [io 0x0c6f] has been reserved
system 00:0a: [io 0x0cd0-0x0cd1] has been reserved
system 00:0a: [io 0x0cd2-0x0cd3] has been reserved
system 00:0a: [io 0x0cd4-0x0cd5] has been reserved
system 00:0a: [io 0x0cd6-0x0cd7] has been reserved
system 00:0a: [io 0x0cd8-0x0cdf] has been reserved
system 00:0a: [io 0x0800-0x089f] has been reserved
system 00:0a: [io 0x0b20-0x0b3f] has been reserved
system 00:0a: [io 0x0900-0x090f] has been reserved
system 00:0a: [io 0x0910-0x091f] has been reserved
system 00:0a: [io 0xfe00-0xfefe] has been reserved
system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0a: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:0a: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:0a: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:0a: [mem 0xfed00000-0xfed00fff] has been reserved
system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 12 devices
ACPI: bus type PNP unregistered
pci 0000:00:04.0: PCI bridge to [bus 01]
pci 0000:00:04.0: bridge window [io 0xe000-0xefff]
pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 02]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
pci_bus 0000:02: resource 4 [io 0x0000-0x03af]
pci_bus 0000:02: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:02: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:02: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:02: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:02: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:02: resource 10 [mem 0xc0000000-0xffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 16428k freed
AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
AMD-Vi: Extended features: PreF PPR GT IA
AMD-Vi: Interrupt remapping enabled
pci 0000:00:00.2: irq 40 for MSI/MSI-X
AMD-Vi: Lazy IO/TLB flushing enabled
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xb9858000-0xbd858000] (64MB) mapped at [ffff8800b9858000-ffff8800bd857fff]
perf: AMD NB counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
Scanning for low memory corruption every 60 seconds
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1374153457.588:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 14227
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfef4f000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.10.0-3-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xfef4d000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.10.0-3-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:12.0: irq 18, io mem 0xfef50000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 3.10.0-3-generic ohci_hcd
usb usb3: SerialNumber: 0000:00:12.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 5 ports detected
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:13.0: irq 18, io mem 0xfef4e000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 3.10.0-3-generic ohci_hcd
usb usb4: SerialNumber: 0000:00:13.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ohci_hcd 0000:00:14.5: OHCI Host Controller
ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:14.5: irq 18, io mem 0xfef4c000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 3.10.0-3-generic ohci_hcd
usb usb5: SerialNumber: 0000:00:14.5
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 6
xhci_hcd 0000:00:10.0: irq 41 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 42 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 43 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 44 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 45 for MSI/MSI-X
usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 3.10.0-3-generic xhci_hcd
usb usb6: SerialNumber: 0000:00:10.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 7
usb usb7: New USB device found, idVendor=1d6b, idProduct=0003
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: xHCI Host Controller
usb usb7: Manufacturer: Linux 3.10.0-3-generic xhci_hcd
usb usb7: SerialNumber: 0000:00:10.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.1: xHCI Host Controller
xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 8
xhci_hcd 0000:00:10.1: irq 46 for MSI/MSI-X
xhci_hcd 0000:00:10.1: irq 47 for MSI/MSI-X
xhci_hcd 0000:00:10.1: irq 48 for MSI/MSI-X
xhci_hcd 0000:00:10.1: irq 49 for MSI/MSI-X
xhci_hcd 0000:00:10.1: irq 50 for MSI/MSI-X
usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: xHCI Host Controller
usb usb8: Manufacturer: Linux 3.10.0-3-generic xhci_hcd
usb usb8: SerialNumber: 0000:00:10.1
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.1: xHCI Host Controller
xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 9
usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: xHCI Host Controller
usb usb9: Manufacturer: Linux 3.10.0-3-generic xhci_hcd
usb usb9: SerialNumber: 0000:00:10.1
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: [email protected]
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: bcd64c1b9ae5370cbf679216e9fe3c7ed5d753eb'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
rtc_cmos 00:06: setting system clock to 2013-07-18 13:17:38 UTC (1374153458)
powernow-k8: This CPU is not supported anymore, using acpi-cpufreq instead.
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 1340k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1136k freed
Freeing unused kernel memory: 1004k freed
systemd-udevd[116]: starting version 204
libahci: module verification failed: signature and/or required key missing - tainting kernel
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:01:00.0: irq 51 for MSI/MSI-X
ahci 0000:00:11.0: version 3.0
r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000c0e000, d4:3d:7e:2a:29:63, XID 0c900800 IRQ 51
r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
ahci 0000:00:11.0: irq 52 for MSI/MSI-X
ahci 0000:00:11.0: irq 53 for MSI/MSI-X
ahci 0000:00:11.0: irq 54 for MSI/MSI-X
ahci 0000:00:11.0: irq 55 for MSI/MSI-X
ahci 0000:00:11.0: irq 56 for MSI/MSI-X
ahci 0000:00:11.0: irq 57 for MSI/MSI-X
ahci 0000:00:11.0: irq 58 for MSI/MSI-X
ahci 0000:00:11.0: irq 59 for MSI/MSI-X
ahci 0000:00:11.0: AHCI 0001.0300 32 slots 8 ports 6 Gbps 0xff impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
scsi7 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfef51000 port 0xfef51100 irq 52
ata2: SATA max UDMA/133 abar m2048@0xfef51000 port 0xfef51180 irq 53
ata3: SATA max UDMA/133 abar m2048@0xfef51000 port 0xfef51200 irq 54
ata4: SATA max UDMA/133 abar m2048@0xfef51000 port 0xfef51280 irq 55
ata5: SATA max UDMA/133 abar m2048@0xfef51000 port 0xfef51300 irq 56
ata6: SATA max UDMA/133 abar m2048@0xfef51000 port 0xfef51380 irq 57
ata7: SATA max UDMA/133 abar m2048@0xfef51000 port 0xfef51400 irq 58
ata8: SATA max UDMA/133 abar m2048@0xfef51000 port 0xfef51480 irq 59
ata1: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
usb 4-2: new full-speed USB device number 2 using ohci_hcd
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-8: OCZ-AGILITY, 1.5, max UDMA/133
ata4.00: 125045424 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA OCZ-AGILITY 1.5 PQ: 0 ANSI: 5
sd 3:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
sd 3:0:0:0: Attached scsi generic sg0 type 0
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 >
sd 3:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda1): INFO: recovery required on readonly filesystem
EXT4-fs (sda1): write access will be enabled during recovery
tsc: Refined TSC clocksource calibration: 4700.027 MHz
Switching to clocksource tsc
usb 4-2: New USB device found, idVendor=0403, idProduct=6001
usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-2: Product: FT232R USB UART
usb 4-2: Manufacturer: FTDI
usb 4-2: SerialNumber: A800fq8V
usb 8-1: new full-speed USB device number 2 using xhci_hcd
usb 8-1: Device not responding to set address.
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
usb 8-1: Device not responding to set address.
usb 8-1: device not accepting address 2, error -71
Adding 7550972k swap on /dev/sda5. Priority:-1 extents:1 across:7550972k SSFS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[313]: starting version 204
lp: driver loaded but no devices found
AMD IOMMUv2 driver by Joerg Roedel
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Disabling lock debugging due to kernel taint
wmi: Mapper loaded
[fglrx] Maximum main memory to use for locked dma buffers: 6899 MBytes.
[fglrx] vendor: 1002 device: 990c count: 1
[fglrx] ioport: bar 1, base 0xf000, size: 0x100
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 13.10.10 [May 23 2013] with 1 minors
usb 8-2: new full-speed USB device number 4 using xhci_hcd
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
hda-intel 0000:00:01.1: Using LPIB position fix
hda-intel 0000:00:01.1: Force to non-snoop mode
snd_hda_intel 0000:00:01.1: irq 60 for MSI/MSI-X
hda-intel 0000:00:01.1: Enable sync_write for stable communication
microcode: CPU0: patch_level=0x06001119
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.1/sound/card0/input2
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.1/sound/card0/input3
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/sound/card0/input4
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input5
hda-intel 0000:00:14.2: Using LPIB position fix
hda-intel 0000:00:14.2: Enable sync_write for stable communication
usb 8-2: New USB device found, idVendor=0566, idProduct=3015
usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 8-2: Product: USB KEYBOARD
usb 8-2: Manufacturer: ELAN
usb 8-2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
SKU: Nid=0x1d sku_cfg=0x4007f603
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x0
SKU: check_sum=0x00000007
SKU: customization=0x000000f6
SKU: external_amp=0x0
SKU: platform_type=0x0
SKU: swap=0x1
SKU: override=0x1
autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
dig-out=0x1e/0x0
inputs:
Front Mic=0x19
Rear Mic=0x18
Line=0x1a
realtek: No valid SSID, checking pincfg 0x4007f603 for NID 0x1d
realtek: Enabling init ASM_ID=0xf603 CODEC_ID=10ec0892
input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input6
input: HD-Audio Generic Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card1/input7
input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input8
input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
microcode: CPU1: patch_level=0x06001119
microcode: CPU2: patch_level=0x06001119
microcode: CPU3: patch_level=0x06001119
microcode: Microcode Update Driver: v2.00 , Peter Oruba
type=1400 audit(1374153460.079:2): apparmor="STATUS" operation="profile_load" parent=373 profile="unconfined" name="/sbin/dhclient" pid=408 comm="apparmor_parser"
type=1400 audit(1374153460.079:3): apparmor="STATUS" operation="profile_load" parent=373 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=408 comm="apparmor_parser"
type=1400 audit(1374153460.079:4): apparmor="STATUS" operation="profile_load" parent=373 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=408 comm="apparmor_parser"
type=1400 audit(1374153460.079:5): apparmor="STATUS" operation="profile_replace" parent=373 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=408 comm="apparmor_parser"
type=1400 audit(1374153460.079:6): apparmor="STATUS" operation="profile_replace" parent=373 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=408 comm="apparmor_parser"
type=1400 audit(1374153460.079:7): apparmor="STATUS" operation="profile_replace" parent=373 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=408 comm="apparmor_parser"
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
usbcore: registered new interface driver ftdi_sio
ftdi_sio 4-2:1.0: FTDI USB Serial Device converter detected
usb 4-2: Detected FT232RL
usb 4-2: Number of endpoints 2
usb 4-2: Endpoint 1 MaxPacketSize 64
usb 4-2: Endpoint 2 MaxPacketSize 64
usb 4-2: Setting MaxPacketSize 64
usb 4-2: FTDI USB Serial Device converter now attached to ttyUSB0
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: ELAN USB KEYBOARD as /devices/pci0000:00/0000:00:10.1/usb8/8-2/8-2:1.0/input/input14
hid-generic 0003:0566:3015.0001: input,hidraw0: USB HID v1.10 Keyboard [ELAN USB KEYBOARD] on usb-0000:00:10.1-2/input0
hid-generic 0003:0566:3015.0002: usage index exceeded
hid-generic 0003:0566:3015.0002: item 0 2 2 2 parsing failed
hid-generic: probe of 0003:0566:3015.0002 failed with error -22
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
vesafb: mode is 1280x800x32, linelength=5120, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90011180000, using 4032k, total 4032k
Console: switching to colour frame buffer device 160x50
fb0: VESA VGA frame buffer device
init: failsafe main process (595) killed by TERM signal
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
ppdev: user-space parallel port driver
usb 8-1: new full-speed USB device number 5 using xhci_hcd
init: avahi-cups-reload main process (728) terminated with status 1
type=1400 audit(1374153461.003:8): apparmor="STATUS" operation="profile_load" parent=739 profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=744 comm="apparmor_parser"
type=1400 audit(1374153461.003:9): apparmor="STATUS" operation="profile_load" parent=739 profile="unconfined" name="/usr/sbin/cupsd" pid=744 comm="apparmor_parser"
type=1400 audit(1374153461.003:10): apparmor="STATUS" operation="profile_replace" parent=739 profile="unconfined" name="/usr/sbin/cupsd" pid=744 comm="apparmor_parser"
usb 8-1: New USB device found, idVendor=1532, idProduct=0101
usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 8-1: Product: Razer Copperhead Laser Mouse
usb 8-1: Manufacturer: Razer
input: Razer Razer Copperhead Laser Mouse as /devices/pci0000:00/0000:00:10.1/usb8/8-1/8-1:1.0/input/input15
hid-generic 0003:1532:0101.0003: input,hidraw1: USB HID v1.00 Mouse [Razer Razer Copperhead Laser Mouse] on usb-0000:00:10.1-1/input0
input: Razer Razer Copperhead Laser Mouse as /devices/pci0000:00/0000:00:10.1/usb8/8-1/8-1:1.1/input/input16
hid-generic 0003:1532:0101.0004: input,hidraw2: USB HID v0.01 Keyboard [Razer Razer Copperhead Laser Mouse] on usb-0000:00:10.1-1/input1
r8169 0000:01:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:01:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
fglrx_pci 0000:00:01.0: irq 61 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 988
[fglrx] Firegl kernel thread PID: 989
[fglrx] Firegl kernel thread PID: 990
[fglrx] IRQ 61 Enabled
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:fb7c000, size:484000
[fglrx] Reserved FB block: Unshared offset:2ffee000, size:12000
r8169 0000:01:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
systemd-hostnamed[2051]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
usb 2-4: new high-speed USB device number 4 using ehci-pci
usb 2-4: New USB device found, idVendor=174c, idProduct=55aa
usb 2-4: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 2-4: Product: RVS02 SuperSpeed
usb 2-4: Manufacturer: SST
usb 2-4: SerialNumber: 0000000000000001BA
usb-storage 2-4:1.0: USB Mass Storage device detected
scsi8 : usb-storage 2-4:1.0
usbcore: registered new interface driver usb-storage
scsi 8:0:0:0: Direct-Access SST RVS02 SuperSpeed 1.3 PQ: 0 ANSI: 5
sd 8:0:0:0: Attached scsi generic sg1 type 0
sd 8:0:0:0: [sdb] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 8:0:0:0: [sdb] Write Protect is off
sd 8:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 8:0:0:0: [sdb] No Caching mode page present
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] No Caching mode page present
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 8:0:0:0: [sdb] No Caching mode page present
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Attached SCSI disk
EXT4-fs (sdb1): warning: maximal mount count reached, running e2fsck is recommended
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
audit_printk_skb: 150 callbacks suppressed
type=1400 audit(1374154828.080:61): apparmor="STATUS" operation="profile_replace" parent=9641 profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=9645 comm="apparmor_parser"
type=1400 audit(1374154828.080:62): apparmor="STATUS" operation="profile_replace" parent=9641 profile="unconfined" name="/usr/sbin/cupsd" pid=9645 comm="apparmor_parser"
type=1400 audit(1374154828.080:63): apparmor="STATUS" operation="profile_replace" parent=9641 profile="unconfined" name="/usr/sbin/cupsd" pid=9645 comm="apparmor_parser"